Linux on the Toshiba Satellite 5005-S504 Laptop: Hardware

Back to the main page about Linux on the Toshiba Satellite 5005-S504.

General system information:
Linux gramsci 2.4.13 #14 Sun Dec 2 21:06:44 AST 2001 i686 unknown

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 8
model name	: Pentium III (Coppermine)
stepping	: 10
cpu MHz		: 1096.700
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 2188.90
    

Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/hda2             28352092   2615716  24296152  10% /
    

Disk /dev/hda: 255 heads, 63 sectors, 3648 cylinders
Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1             1        62    497983+  82  Linux swap
/dev/hda2   *        63      3648  28804545   83  Linux
    

Hard Disk

/dev/hda:

Model=TOSHIBA MK3017GAP, FwRev=A0.06 H, SerialNo=X1LA1588T
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=46
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58605120
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4 
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 

PCMCIA

Output of probe:

PCI bridge probe: Toshiba ToPIC100 found, 2 sockets. 
    

...

Floppydrive

floppy0: no floppy controllers found
    

Survey PCI Devices

Output from lspci:

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corp.: Unknown device 1131 (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 11)
00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 11)
00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 11)
00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 11)
00:1f.4 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev 11)
00:1f.5 Multimedia audio controller: Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller [..]
00:1f.6 Modem: Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Modem Controller (rev 11)
01:00.0 VGA compatible controller: nVidia Corporation GeForce2 Go (rev b2)
02:07.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8023
02:08.0 Ethernet controller: Intel Corp. 82820 (ICH2) Chipset Ethernet Controller (rev 03)
02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support [..]
02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support [..]
02:0c.0 System peripheral: Toshiba America Info Systems: Unknown device 0804 (rev 03)
02:0d.0 System peripheral: Toshiba America Info Systems: Unknown device 0805 (rev 03)
    

Survey PnP Devices

Output from pnpdump:

# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DHAVE_PROC -DENABLE_PCI 
# -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
# 
# Trying port address 0273
# Trying port address 027b
# Trying port address 0283
# Trying port address 028b
# Trying port address 0293
# Trying port address 029b
# Trying port address 02a3
# Trying port address 02ab
# Trying port address 02b3
# Trying port address 02bb
# Trying port address 02c3
# Trying port address 02cb
# Trying port address 02d3
# Trying port address 02db
# Trying port address 02e3
# Trying port address 02eb
# Trying port address 02f3
# Trying port address 02fb
# Trying port address 0303
# Trying port address 030b
# Trying port address 0313
# Trying port address 031b
# Trying port address 0323
# Trying port address 032b
# Trying port address 0333
# Trying port address 033b
# Trying port address 0343
# Trying port address 034b
# Trying port address 0353
# Trying port address 035b
# Trying port address 0363
# Trying port address 036b
# Trying port address 0373
# Trying port address 037b
# Trying port address 0383
# Trying port address 038b
# Trying port address 0393
# Trying port address 039b
# Trying port address 03a3
# Trying port address 03ab
# Trying port address 03b3
# Trying port address 03bb
# Trying port address 03e3
# Trying port address 03eb
# Trying port address 03f3
# Trying port address 03fb
# No boards found
    

Survey RS232

Output from setserial:

/dev/ttyS0, Line 0, UART: unknown, Port: 0x03f8, IRQ: 4
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test

/dev/ttyS1, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test

/dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test

/dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal