TuxMobil: Linux with Laptops, PDAs, Mobile Phones and Portable Computers
PRINT version of "PCMCIA/CardBus/CF-Card Linux Survey: CNet CNF-301"
    <= Back to SCREEN version <=

manufacturer:
CNet(http://www.cnetusa.com)
card name:
CNF-301
card type:
ethernet 10/100BaseT
Linux status:
works
.
The AX88190 chipset is supported since PCMCIA-CS 3.1.27 by the axnet_cs module, maybe you have to add an entry to /etc/pcmcia/config.opts. Doesn't work, with pcnet_cs driver card reports no hardware address. This can be fixed by this entry in /etc/pcmcia/config.opts module "pcnet_cs" opts "hw_addr=0x00,0x80,0xc8,0x01,0x02,0x03" but than I got eth0: interrupt from stopped card. Though not mentioned on the box, there is a Linux driver source 8390.o on the driver floppy, but IMHO this is misconfigured: card ID in the configuration file and card ID from cardctl ident don't match.
For ASIX chips see BUGS(http://pcmcia-cs.sourceforge.net/ftp/BUGS), too. Config file from ASIX driver disk: card "ASIX AX88190 Based Fast Ethernet PCMCIA Card" version "ASIX", "AX88190" bind "pcnet_cs", but see new developments in PCMCIA-CS package >= 3.1.27
product info: "CNet", "CNF301", "", ""
manfid: 0xffff, 0x1090
function: 6 (network)

source:
own research
conf file:
(under construction)
back to card survey sorted by: manufacturer card type Linux status manufacturer ID




        /* Adv.    Xtops.DE - Laptops and PDAs with pre-installed Linux   Adv. */        

http://tuxmobil.org/pcmcia_ci10070.html, copyright © Werner Heuser, 1997-2008