Please see XFree86-HOWTO(http://www.tldp.org) for further details on X-Windows. Back to· Linux with the Toshiba Satellite 2800-500(toshiba_s2800_500_e.html)
##########################################################################
# Sample XF86Config file for NVIDIA XFree86 drivers.
#
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
# Be sure to replace the monitor values with correct values for your
# monitor!
#
# modified by Xtops.DE wh 03/06/2001
# please note, due to a bug in the NVidia driver, you will
# lock your machine, when starting the X-Server a second time,
# so please reboot.
#
##########################################################################
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
# FontPath "unix/:-1"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
##########################################################################
# Server flags section.
##########################################################################
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt>\ server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
##########################################################################
# Input devices
##########################################################################
#
# Keyboard section
#
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
#
# Pointer section
#
Section "InputDevice"
# disable `gpm' mouse manager before starting X!!! /etc/init.d/gpm stop
Identifier "Mouse1"
Driver "mouse"
# Option "Protocol" "Auto" # doesn't work !!! mouse doesn't move
# Option "Protocol" "PS/2" # works
Option "Protocol" "IMPS/2" # works for external USB mouse too
# Option "Device" "/dev/gpmdata"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "On"
Option "Emulate3Timeout" "50"
Option "Buttons" "4"
Option "ZAxisMapping" "4 2"
EndSection
Section "InputDevice"
# disable `gpm' mouse manager before starting X!!! /etc/init.d/gpm stop
# doesn't seem to work simultaneously with internal mouse stick,
# so you have to move the CorePointer option below
Identifier "Mouse2"
Driver "mouse"
# Option "Protocol" "Auto" # doesn't work !!! mouse doesn't move
# Option "Protocol" "USB" # unknown protocol !!!
Option "Protocol" "IMPS/2" # works for external USB mouse too
# Option "Device" "/dev/gpmdata"
Option "Device" "/dev/input/mouse0" # external USB mouse
Option "Buttons" "5" # external USB mouse
Option "ZAxisMapping" "4 5" # external USB mouse
EndSection
##########################################################################
# Module section
##########################################################################
Section "Module"
Load "dbe"
# Load the glx module.
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
##########################################################################
# Monitor section
##########################################################################
Section "Monitor"
Identifier "MyMonitor"
VendorName "Mitsubisi"
ModelName "Diamond Plus 120u"
# be sure to replace these values with values appropriate for your
# monitor!
HorizSync 31-82
VertRefresh 55-120
EndSection
##########################################################################
# Graphics device section(s)
##########################################################################
Section "Device"
Identifier "NV AGP"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:01:00:0"
#BusID "PCI:1:0:0"
Option "NvAgp" "2"
EndSection
Section "Device"
Identifier "NV PCI"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:01:00:0"
Option "NvAgp" "2"
EndSection
Section "Device"
Identifier "NV AGP TwinView"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
# sample twinview setup
Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct values
# for your monitor!
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "55-120"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
Option "ConnectedMonitor" "crt,crt"
EndSection
##########################################################################
# Screen sections
##########################################################################
# this is used on the Toshiba Satellite 2800-500
#
# screen section for an nvidia AGP card
#
Section "Screen"
Identifier "Screen AGP"
Device "NV AGP"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
# Modes "1280x1024" "1024x768" "800x600" "640x400"
Modes "1024x768" "800x600" "640x400"
# Modes "640x400" "800x600" "1024x768" "1280x1024"
EndSubsection
Subsection "Display"
Depth 16
# Modes "1280x1024" "1024x768" "800x600" "640x480"
Modes "1024x768" "800x600" "640x480"
# Modes "640x480" "800x600" "1024x768" "1280x1024"
EndSubsection
Subsection "Display"
Depth 24
# Modes "1280x1024" "1024x768" "800x600" "640x480"
Modes "1024x768" "800x600" "640x480"
# Modes "640x480" "800x600" "1024x768" "1280x1024"
EndSubsection
EndSection
#
# screen section for an nvidia PCI card
#
Section "Screen"
Identifier "Screen PCI"
Device "NV PCI"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
Section "Screen"
Identifier "Screen AGP TwinView"
Device "NV AGP TwinView"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################
#
# just one agp card
#
Section "ServerLayout"
Identifier "AGP"
Screen "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one pci card
#
Section "ServerLayout"
Identifier "PCI"
Screen "Screen PCI"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, non twinview
#
Section "ServerLayout"
Identifier "Both"
Screen "Screen AGP"
Screen "Screen PCI" LeftOf "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one agp twinview card
#
Section "ServerLayout"
Identifier "AGPTwinView"
Screen "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
Section "ServerLayout"
Identifier "BothTwinView"
Screen "Screen AGP TwinView"
Screen "Screen PCI" LeftOf "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection